- Video Game Consoles[1]
- Aluminum Strips[2]
- Steel Strips[3]
- Copper Strips[1]
- Transfer Film[2]
- Pigment[1]
- Hot Stamping Foil[4]
- Alarm[2]
- Sensors[8]
- Contact Person : Ms. Guo Lin
- Company Name : Wuxi Longsun Cable Materials Co., Ltd.
- Tel : 86-510-83899630
- Fax : 86-510-83899380
- Address : Jiangsu,Wuxi,Shuguang, Yuqi Town, Wuxi City
- Country/Region : China
- Zip : 214183
AW100S 10.525GHz Microwave Motion Sensor Module
AW100S Miniature Microwave Motion Sensor is a X-Band Bi-Static Doppler transceiver module. Its built-in Dielectric Resonator Oscillator (DRO) and a pair of Microstrip patch antenna array, make it ideal for OEM usage in motion detection equipment.This module is ideally suitable for false alarms reduction in intruder detectors when work together with Passive Infrared (PIR) sensor. It can also be used for auto-door opening and vehicle speedmeasurement.
Ÿ Wide Temperature -40°C~+85°C
Ÿ Low current consumption
Ÿ CW or Pulse operation
Ÿ Flat profile
Ÿ Long detection range
Ÿ Microwave-PIR motion detector
Ÿ Speed measurement
Ÿ Auto-door opening
Ÿ Lighting control
Unless noted otherwise, the specifications are measured with +5VDC, CW operation, 12 kΩ load at ambient temperature of +25°C.
Parameter | notes | Min | Typ. | Max | Units |
Frequency Setting | 1 | 10.520 | 10.525 | 10.530 | GHz |
Radiated Power (EIRP) | 1 | 12 | 15 | 20 | dBm |
Spurious Emission | 1 | -7.3 | dBm | ||
Settling Time | 3 | 6 | μSec | ||
Received Signal Strength | 2 | 200 | μVp-p | ||
Noise | 3 | 10 | μVrms | ||
Antenna Beam-width (3 dB) - Azimuth | 85 | ° | |||
Antenna Beam-width (3 dB) - Elevation | 38 | ° | |||
Supply Voltage | 4.75 | 5.00 | 5.25 | VDC | |
Current Consumption | 40 | 60 | mA | ||
Pulse Repetition Frequency | 4 | 2 | KHz | ||
Pulse Width | 4 | 10 | μSec | ||
Operating Temperature | -10 | 55 | °C | ||
Weight | 9 | gm |
Note 1: The radiated emissions of HB100 is designed to meet the requirements of Federal Communications Commission (FCC) rules, Part 15, Section 15.245 (use within a building or to open building door)
Note 2: The Received Signal Strength (RSS) is measured at the total 2 ways path loss of 93dB.
Note 3: The noise voltages are measured from 10 Hz to 100 Hz at the output port, inside an Anechoic chamber.
Note 4: Pulse operation.
Note 5: The design, manufacturing process and specifications of this device are subjected to change without prior notice.
Note 6: CAUTION: ELECTROSTATIC SENSITIVE DEVICE. Observe precautions for handling and storage.
AW100S 10.525GHz Microwave Motion Sensor Module